TRIMBLE BX982 Receiver

Trimble BX982 is a L1, L2 and L5 GPS, Glonass, Galileo and Beidou Capable for Autonomous, DGNSS and RTK Applications with heading

More details

  • Easy to integrate rugged package
  • Two 220 channel Maxwell 6 chips for multiconstellation GNSS support
  • OmniSTAR VBS / XP / G2 / HP support
  • Dual antenna inputs for precise heading calculation
  • Centimeter level position accuracy
  • Convenience of ethernet connectivity
  • Supports FDE and RAIM

Connect to our live BD982 Receiver

BX982 GNSS RUGGED RECEIVER ENCLOSURE
The Trimble® BX982 GNSS receiver enclosure is a multi-channel, multifrequency OEM GNSS receiver which allows OEM’s and System Integrators to rapidly integrate centimeter level positioning and precise heading into their application. The Trimble BX982 supports GPS L1/L2/L5, GLONASS L1/L2/L3 and BeiDou B1, B2 signals. In addition, Trimble is committed to the next generation of modernized GNSS configurations by providing GALILEO compatible products available for customers well in advance of GALILEO system becoming operational. In support of this, the Trimble BX982 is capable of tracking Galileo signals for evaluation and test purposes.

DUAL-ANTENNA INPUT
Single antenna GNSS systems have difficulty determining where the antenna is positioned relative to the vehicle and object of interest, especially when dynamics are low. External sensors can be used to augment this however these tend to drift when static.
Heading derived from dual-antenna GNSS measurements overcomes these issues and is now economically the right choice.
The BX982 harnesses the power of the 220 channel Trimble Maxwell 6 Technology with dual chips supporting two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed. A single connection to the BX982 via RS232, USB, Ethernet or CAN delivers both centimeter accurate positions and less than a tenth of a degree (2 meter baseline) heading accuracy.

FLEXIBLE INTERFACING
The Trimble BX982 was designed for easy integration and rugged dependability.
Customers benefit from the Ethernet connectivity available on the board, allowing high speed data transfer and configuration via standard web browsers. Just like other Trimble embedded technologies; easy to use software commands simplify integration and reduce development times. All software features are password-upgradeable, allowing functionality to be upgraded as your requirements change.

HIGH INTEGRITY
The BX982 supports Fault Detection and Exclusion (FDE) and Receiver Autonomous Integrity Monitoring (RAIM) for safety-critical applications.

RUGGED RECEIVER ENCLOSURE
The Trimble BX982 packages a single BD982 receiver module in a rugged enclosure. The unit comes in an environmentally sealed enclosure that is very easy to install. The BX982 is rigorously tested to perform in harsh environmental conditions with the reliability you expect from Trimble.

RTK_BX982_DS

Data Sheet for the Trimble Bx982

Download (107.04k)

RTK_TRIMBLE-Antenna_SF

Brochure introducing the Trimble RTK Antennas

Download (269.98k)

RTK_TRIMBLE-GNSS_SF

Brochure presenting the GNSS OEM solution for RTK from Trimble

Download (417.53k)

RTK_TRIMBLE-RTK_AP

Brochure showing how to use Trimble RTK Products for UAV integration

Download (294.32k)

RTK_BX935-INS_UG

User Guide for the Trimble Bx935-INS

Download (1.7M)
DescriptionPart-Number
Trimble BX982 L1 GPS (Autonomous/SBAS Only_ Single Antenna Enabled)85992-01
Trimble BX982_30cm Position GPS + Heading (Dual Antenna Enabled)*85992-02
Trimble BX982_30cm Position GPS/GLN + Heading (Dual Antenna Enabled)*85992-03
Trimble BX982_10cm Position GPS/GLN + Heading (Dual Antenna Enabled)*85992-13
Trimble BX982_ GPS_GLN L1 RTK Base/Rover + Heading (Dual Antenna Enabled)85992-10
Trimble BX982_ GPS_GLN L1 RTK Base/Rover + Heading (Dual Antenna Enabled)(Ag sCMR Outputs)285992-11
Trimble BX982_RAW MEASUREMENT DATA ONLY (Dual Antenna Enabled)85992-04
Trimble BX982_RTK ROVER L1/L2/L5 GPS (Single Antenna Enabled)85992-05
Trimble BX982_RTK REFERENCE/ROVER L1/L2/L5 GPS+ Heading (Dual Antenna Enabled)85992-06
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN (Single Antenna Enabled)85992-07
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN (Single Antenna Enabled)(Ag sCMR Outputs)285992-12
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN + Heading (Dual Antenna Enabled)85992-00
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN/GAL (Single Antenna Enabled)85992-08
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN/GAL + Heading (Dual Antenna Enabled)85992-09
Trimble BX982_RTK REFERENCE/ROVER GPS/GLN/GAL/BDS + Heading (Dual Antenna Enabled)385992-15